Service equipment means measuring instruments and filling, discharge, venting, safety, heating, cooling and insulating devices

Service equipment means measuring instruments and filling, discharge, venting, safety, pressurizing, cooling and thermal insulation devices

The three underground nuclear tests carried out at 1545 hours on 11 May were with three different devices a fission device, a low yield sub kiloton device and a thermonuclear device.

Service equipment means measuring instruments and filling, discharge, venting, safety and insulating devices

(b) Reactor NPS with electrical capacity ranging from 20 50 kW to 250 kW, in the form of NPUs based on reactors with liquid metal or gas coolants and with heat pipes based on the Brayton and Rankine cycle conversion systems and the thermoelectric conversion system.

(c) When the protective covering is so closed as to be gas tight, a device shall be provided to prevent any dangerous pressure from developing in the insulating layer in the event of inadequate gas tightness of the shell or of its items of equipment

(d) The thermal insulation shall not inhibit access to the fittings and discharge devices.

And I had finally got around to doing some draft stripping, installing insulation around the windows and doors to keep out the drafts.

If you put electricity in, this will get hot and this will get cold, you get refrigeration.

(f) Improvement of the energy efficiency of plants for the provision of low temperature heat (for example industrial cogeneration plant, heating boilers or similar devices) and other small combustion plants, and regular examination of such plants

Recommended measures include the expulsion of residual propellants by burning or venting, the discharge of electrical storage devices, the release of pressurized fluids, thermal control and safing of unused destruct devices and the unloading (despinning) of momentum wheels and similar attitude control apparatus.

Effectivemeasures include the expulsion of residual propellants by burning or venting, the discharge of electrical storage devices, the release of pressurized fluids, thermal control and safing of unused destruct devices and the unloading (despinning) of momentum wheels and similar attitude control apparatus.

The outer surface of the test vessel, below the liquid level, is provided with an electrical heating coil or cartridge heaters connected to a power supply.

The Department of Energy (DoE) has developed a new model RTG with a more efficient fuel design called the General Purpose Heat Source (GPHS).

Self neutralization mechanism means an incorporated automatically functioning mechanism which renders inoperable the munition into which it is incorporated.

Incorporation of fail safe, sterilization, self destruct features, et cetera, should be considered (reference STANAG 4187).

Magnetic stir bars are highly chemically inert, small magnetic bars. Most heaters have a built in magnet which can rotate this causes the stir bar to rotate and the mixture to become homogenized.

4.2.1.13.9 For insulated portable tanks the capacity and setting of emergency relief device(s) shall be determined assuming a loss of insulation from 1 of the surface area.

KDE Hotkeys Configuration Module

Self destruction mechanism means an incorporated or externally attached automatically functioning mechanism which secures the destruction of the munition into which it is incorporated or to which it is attached.

6.6.2.15 Siting of pressure relief devices

6.6.3.11 Siting of pressure relief devices

6.6.4.10 Siting of pressure relief devices

4.2.1.13.6 Portable tanks shall be fitted with pressure relief devices and emergency relief devices.

In order to prevent the unintended destruction in space of the second stage of the H II launcher, the command destruct system is disabled immediately after injection into orbit and its pyrotechnics are thermally insulated to preclude spontaneous initiation.

Holding time means the time that will elapse from the establishment of the initial filling condition until the pressure has risen due to heat influx to the lowest set pressure of the pressure limiting device(s)

There may be some mass penalty to include devices to minimize the creation of debris and devices fuel used to implement manoeuvres for ending mission life.

4.2.1.4 The temperature of the outer surface of the shell excluding openings and their closures or of the thermal insulation shall not exceed 70 oC during transport.

(b) The required electrical capacity of NPUs and NPPUs for a power system is about 50 kW, while the thermal energy of NPPUs in propulsion systems is of the order of 35 MW these levels explain why the use of radioisotope space NPS is excluded.

Where appropriate the transport unit shall be fitted with devices to facilitate securing and handling of the dangerous goods.

Mobile sets

DEBIE (Debris In Orbit Evaluator) is one such sensor.

Military equipment in the form of night vision devices was also part of a shipment of arms to a warlord located in Mogadishu.

This measure reinforces the one previously taken concerning the prohibition of production and export of these devices and the procedures for their destruction.

Unless a portable tank in dedicated service is fitted with an approved relief device constructed of materials compatible with the load, such device shall comprise a frangible disc preceding a spring loaded device.

Vessel contents should be heated at a constant rate independent of the heat being generated by the organic peroxide or self reactive substance.

NOTE 2 Additional guidance on the packing of transport units can be found in the IMO ILO UNECE Guidelines for Packing Cargo Transport Units (CTUs) contained in the supplement to the International Maritime Dangerous Goods Code.

It's called Bloom, and the surface is made completely out of thermo bimetal, and its intention is to make this canopy that does two things. One, it's a sun shading device, so that when the sun hits the surface, it constricts the amount of sun passing through, and in other areas, it's a ventilating system, so that hot, trapped air underneath can actually move through and out when necessary.

(b) Launcher

6.6.2.6 Bottom openings

6.6.2.8 Pressure relief devices

6.6.2.16 Gauging devices

6.6.3.6 Bottom openings

6.6.3.7 Pressure relief devices

6.6.3.12 Gauging devices