Only when you want the pressure to be released, make an upward gesture, like this, but only when you want the pressure to be released.

And I only want you to allow your hand to float slowly back up from the tabletop as you feel the pressure release, but only when you feel the pressure release.

Only when you want the pressure released, we'll try it again.

And for that, they have been having big pressure to leave, to free the area.

16. Propellant elimination actions should also be designed to relieve high pressure gases employed in pressure fed propulsion systems.

The pressure relief devices shall be of a type that will resist dynamic forces including liquid surge.

The pressure relief devices shall be of the type that will resist dynamic forces including surge.

You can wait as long as you want, but only when you want the pressure released.

(d) when subjected to fire, is protected from rupture by means of a fire degradable seal or a pressure relief device to relieve internal pressure and

The capacity and start to discharge pressure of the relief valves shall be based on the results of the tests specified in 4.2.1.13.1.

By that point the pressure on Pulis will have eased or become insurmountable.

(a) Each plug or valve shall have a taper threaded connection directly to the pressure receptacle and be capable of withstanding the test pressure of the pressure receptacle without damage or leakage

The civilian defendants were released because their testimonies had been made under duress.

Grazing pressure measurements.

TPO temperature of peroxide at relieving conditions K

Vents or pipes from the pressure relief device outlets, when used, shall deliver the relieved vapour or liquid to the atmosphere in conditions of minimum back pressure on the relieving devices.

Pipework to vent the vapour or liquid from the outlet of the pressure relief devices, when used, shall deliver the relieved vapour or liquid to the atmosphere in conditions of minimum back pressure on the relieving device.

Vents from the pressure relief devices, when used, shall deliver the relieved vapour or liquid to the atmosphere in conditions of minimum back pressure on the relieving device.

However, merchants' pressure should never be released through illegal means, while consumers should make good use of their rights.

4.2.1.13.10 Vacuum relief devices and spring loaded valves shall be provided with flame arresters.

Pressure relief requirements are as indicated in 6.6.2.8.3 to prevent crystallization of the product in the pressure relief valve.

Surely, any explanation must include the global constriction of credit, especially for small and medium size businesses. Tighter regulation of lending standards has shut out an important source of global investment demand, putting downward pressure on interest rates.

Each pressure receptacle with a wall thickness at any point of less than 2.0 mm and each pressure receptacle that does not have fitted valve protection shall be transported in an outer packaging.

Two pyrotechnic valves were designed and added to the pressurization circuit of the tanks, forcing the latter to open into the void at the end of the mission.

(a) The pressure and emergency relief devices installed on the IBC are designed to take appropriate account of the self accelerating decomposition of the organic peroxide and of fire engulfment and

Unleashing Africa s Girl Power

No stop valve shall be installed between the shell and the pressure relief devices except when duplicate devices are provided for maintenance or other reasons and the stop valves serving the devices actually in use are locked open or the stop valves are interlocked so that the requirements of 6.6.4.7 are always fulfilled.

I urge ASEAN, in particular, to demonstrate effective regional leadership and to heighten pressure on the regime to release her and move along the path of reform.

Call it a power or a force that we are going to release.

6.6.2.8.5 When the shell is fitted for pressure discharge, the inlet line shall be provided with a suitable pressure relief device set to operate at a pressure not higher than the MAWP of the shell, and a stop valve shall be fitted as close to the shell as reasonably practicable.

People who are relieved of depression show it more after than before.

I began to be fascinated by plastic, so I spent four months making eight plastic blocks perfectly optically transparent, as a kind of release of stress.

Turns out that there is still huge unlocked potential.

The top of the tank is provided with either a 1 mm opening which simulates the pressure relief valve (PRV) of the IBC or tank or a real PRV of a diameter which is scaled using the vent area to vessel volume ratio.

Free yourself, free yourself!

6.6.4.5.9 When pressure building units are used, the liquid and vapour connections to that unit shall be provided with a valve as close to the jacket as reasonably practicable to prevent the loss of contents in case of damage to the pressure building unit.

No stop valve shall be installed between the shell and the pressure relief devices except where duplicate devices are provided for maintenance or other reasons and the stop valves serving the devices actually in use are locked open or the stop valves are interlocked so that at least one of the duplicate devices is always in use.

Radio Okay, release the balloon, release the balloon, release the balloon.

And this has unleashed tremendous energy.

These persons were given lawful treatment and were released after pressure from international officials, including the United Nations Transitional Administrator.

(d) The materials of construction for the pressure receptacle, valves, plugs, outlet caps, luting and gaskets shall be compatible with each other and with the lading.

He urged States parties to bring pressure to bear on Israel and to demand that Mordechai Vanunu should be released so that he could work for the cause of abolition.

He urged the Government of Nigeria to release the many political prisoners still being held.

Alternatively, pressurants can be removed with the use of special venting lines and pyrotechnical valves.

Vacuum relief devices, when used, shall have a cross sectional flow area not less than 284 mm2.