No stop valve shall be installed between the shell and the pressure relief devices except where duplicate devices are provided for maintenance or other reasons and the stop valves serving the devices actually in use are locked open or the stop valves are interlocked so that at least one of the duplicate devices is always in use.

No stop valve shall be installed between the shell and the pressure relief devices except when duplicate devices are provided for maintenance or other reasons and the stop valves serving the devices actually in use are locked open or the stop valves are interlocked so that the requirements of 6.6.4.7 are always fulfilled.

6.6.3.5.3 For filling and discharge openings the first shut off device shall be an internal stop valve and the second shall be a stop valve placed in an accessible position on each discharge and filling pipe.

No stop valve shall be installed between the shell and the pressure relief devices except when duplicate devices are provided for maintenance or other reasons and the stop valves serving the devices actually in use are locked open or the stop valves are interlocked so that at least one of the duplicate devices is always operable and capable of meeting the requirements of 6.6.3.8.

And when you turn off the gate, there's no current flowing through the device.

See, our pattern detection device, which appears to be located in the anterior cingulate cortex it's our little detection device there can be easily fooled, and this is the problem.

(e) the rated flow capacity of the device in standard cubic meters of air per second (m3 s).

Other openings, except for openings leading to venting or pressure relief devices, shall be equipped with either a stop valve or another suitable means of closure located as close to the shell as reasonably practicable.

Protective devices which deflect the flow of vapour are permissible provided the required relief device capacity is not reduced.

There shall be no obstruction in an opening leading to a vent or pressure relief device which might restrict or cut off the flow from the shell to that device.

6.6.2.13.2 The rated flow capacity marked on the pressure relief devices shall be determined according to ISO 4126 1 1996.

6.6.3.9.2 The rated flow capacity marked on the pressure relief devices shall be determined according to ISO 4126 1 1996.

6.6.4.8.2 The rated flow capacity marked on the pressure relief devices shall be determined according to ISO 4126 1 1996.

Self neutralization mechanism means an incorporated automatically functioning mechanism which renders inoperable the munition into which it is incorporated.

Incorporation of fail safe, sterilization, self destruct features, et cetera, should be considered (reference STANAG 4187).

The collected data will be used to improve the experimental set up and to assist the development of algorithms for the estimation of the meteoroid influx.

6.6.3.5.2 All openings with a diameter of more than 1.5 mm in shells of portable tanks, except openings for pressure relief devices, inspection openings and closed bleed holes, shall be fitted with at least three mutually independent shut off devices in series, the first being an internal stop valve, excess flow valve or equivalent device, the second being an external stop valve and the third being a blank flange or equivalent device.

And I like to make devices that play with the ways that we relate and communicate.

And I had finally got around to doing some draft stripping, installing insulation around the windows and doors to keep out the drafts.

6.6.2.5.2 All openings in the shell, intended for filling or discharging the portable tank shall be fitted with a manually operated stop valve located as close to the shell as reasonably practicable.

Self destruction mechanism means an incorporated or externally attached automatically functioning mechanism which secures the destruction of the munition into which it is incorporated or to which it is attached.

6.6.2.15 Siting of pressure relief devices

6.6.3.11 Siting of pressure relief devices

6.6.4.10 Siting of pressure relief devices

6.6.4.5.2 Each filling and discharge opening in portable tanks used for the transport of flammable refrigerated liquefied gases shall be fitted with at least three mutually independent shut off devices in series, the first being a stop valve situated as close as reasonably practicable to the jacket, the second being a stop valve and the third being a blank flange or equivalent device.

4.2.1.13.6 Portable tanks shall be fitted with pressure relief devices and emergency relief devices.

Remote closure devices and self closing stop valves shall be operated to demonstrate proper operation

6.6.2.12.1 The spring loaded pressure relief device required by 6.6.2.8.1 shall have a minimum cross sectional flow area equivalent to an orifice of 31.75 mm diameter.

Among the scientific objectives is the determination of the composition of the aerosols and the relative abundance of its constituents, the relative abundance of condensed organic compounds, the mean size of aerosol nucleation sites and the radiative properties of low stratospheric and upper tropospheric particles.

Both satellites are equipped with microwave (radar) instrumentation which penetrates cloud cover and darkness and provides information 24 hours a day.

Where appropriate the transport unit shall be fitted with devices to facilitate securing and handling of the dangerous goods.

Mobile sets

Layer Profile

The three underground nuclear tests carried out at 1545 hours on 11 May were with three different devices a fission device, a low yield sub kiloton device and a thermonuclear device.

DEBIE (Debris In Orbit Evaluator) is one such sensor.

Unless a portable tank in dedicated service is fitted with an approved relief device constructed of materials compatible with the load, such device shall comprise a frangible disc preceding a spring loaded device.

(b) Launcher

6.6.2.6 Bottom openings

6.6.2.8 Pressure relief devices

6.6.2.16 Gauging devices

6.6.3.6 Bottom openings

6.6.3.7 Pressure relief devices

6.6.3.12 Gauging devices

6.6.4.6 Pressure relief devices

6.6.4.11 Gauging devices