Accelerometers on each hand read hand position.

And this is the water feeler.

It has a feeler, where it can feel obstacles and turn around.

Based on information and data provided by States Parties the following broadly available fuzes and sensors shall be considered as relevant acoustic sensors, break wires, fiber optic wires, infrared sensors, magnetic sensors, pressure sensors, roller arms, scratch wire sensors, seismic vibration sensors, tilt rods, trip wires.

This is the sensory data, and that data is transferred to the devices through the computer.

And we're going to attach these memories to sensors, and the sensors will experience real live, real world data, and these things are going to learn about their environment.

her first night in the lab because she was going to make the sensor.

Almost all the sensors developed by Sony are used for cameras. The absence of sensor supply means no cameras to be produced.

This little black dot there is a 3D accelerometer.

Great he needs efferent, afferent, haptic response sensors.

But everything, all the cameras, and the microphones, and the sensors in cars and everything is connected to this machine.

Imagine sensors in the hand coming up and pressing on this new hand skin.

The sensor shall be able to match detected heat signatures to the intended target preferably in conjunction with other sensors.

(v) The scratch wire sensor shall be designed for specific targets by optimizing the scratch time, frequency and amplitude required to initiate the sensor by the intended target.

In that headset you have fabric sensors on your forehead and above the ear.

So, when we did this for responses from the standard method and from our encoder and transducer.

(iii) Pressure sensors shall, where possible, be subject to a minimum pressure force appropriate for the intended target.

Their wing is covered with sensors, including sensors that sense deformation of the wing.

If a single fuze or sensor fulfills the safety requirements of the Best Practices referred to in the previous paragraph, the incorporation of multi sensor fuzes shall be discretionary.

So, this does not have any sensors.

(b) Category Two Fuzing systems that can be designed not to be excessively sensitive, but are best used in conjunction with other sensors, i.e. acoustic sensors, infrared sensors, and seismic vibration sensors.

The sensor shall be capable to match a seismic signature to the intended target.

Each odor activates a different combination of sensors, which in turn activates a different odor detector in the mushroom body.

And so we retrofit these with sensors and processors, and these robots can fly indoors without GPS.

These LED's are wired to sensors that detect the presence of odorous molecules in the air.

And you can use the tilt sensor to steer this car using this game.

The aforementioned broadly available fuzes and sensors shall be graded into the following categories

(i) Acoustically activated fuzes use electronic sensors to react to acoustic pressure and recognize the acoustic signature.

Plus the robots have to base their actions only on local information, what they sense from their neighbors.

(c) Category Three Fuzing systems that can be designed not to be excessively sensitive and can be designed to operate satisfactorily on their own, i.e. fiber optic wires, magnetic sensors, pressure sensors, roller arms and scratch wire sensors.

So we found that that actually was a feature in the sense you could build a pressure sensitive display.

We attach a transducer, in this case, to the brain, but if it will be a different organ, it will be a different transducer attached to the patient.

A radio device is controlling every step I take, and a sensor picks up my foot for me every time I walk.

So, if the body is sensing that you have damage to an organ and then it's initiating cancer, it's almost as if this is a repair response.

It's basically the idea of, you wear a leotard, and they put some reflective markers on your body, and instead of using cameras, there're infrared sensors around a volume, and those infrared sensors track the three dimensional position of those markers in real time.

We share the world community's concerns on the illicit trade in and global proliferation of small arms and light weapons, and believe that all necessary measures to inhibit this trend by strengthening control over the export, manufacture and supply of small arms and light weapons must be taken as soon as possible.

The most critical part of a rebreather is the oxygen sensors.

Those machines have no place for empathy.

And it does this burst of energy.

On board are also a battery, a computer, various sensors and wireless radios.

This is actually sensor firings.

They can embed sensors and actuators right in the form itself.

So it consists of two parts, what we call an encoder and a transducer.

Now, this is a rear projected drafting table. It's about 36 inches wide and it's equipped with a multi touch sensor. Now, normal touch sensors that you see, like on a kiosk or interactive whiteboards, can only register one point of contact at a time.

It's actually a light sensing organ.