Connections for such instruments shall be made by suitable welded nozzles or pockets and not be screwed connections through the shell.

Compressor Welding equipment

Oxygen gas welding kit

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of tubing as may happen when cutting threads.

The melting point of brazing materials shall be no lower than 525 C. The joints shall not decrease the strength of the tubing as may happen by cutting of threads.

Heavy duty MIG welder Hydraulic trolley

They're slow in a partwelded hull.

For welded shells, only a material whose weldability has been fully demonstrated shall be used.

Welded pipe joints shall be used wherever possible.

For welded shells and jackets only materials whose weldability has been fully demonstrated shall be used.

Elsewhere pipe joints shall be welded when necessary.

You see a girl here who is trained as a welder.

I personally obsessed about every nut, bolt and washer in these crazy things.

Why welding and why not computers?

6.6.2.5.9 Joints in copper tubing shall be brazed or have an equally strong metal union.

6.6.3.5.11 Joints in copper tubing shall be brazed or have an equally strong metal union.

6.6.4.5.11 Joints in copper tubing shall be brazed or have an equally strong metal union.

In November 1994, NASA and the Paton Welding Institute in Kiev, Ukraine, initiated a joint project called the International Space Welding Experiment.

The materials shall in principle conform to national or international material standards. For welded shells only a material whose weldability has been fully demonstrated shall be used.

Regulations on permissible noise levels from arc welding equipment, No. 331 1994

Well, this is, again, it's just a ring, a steel ring with steel nuts.

(d) missing or loose bolts or nuts on any flanged connection or blank flange are replaced or tightened

Plate products are used for ship building, construction, large diameter welded pipes and boiler applications.

She is an illiterate girl, trained, skilled as a welder.

It was made of 40 and 50 centimeter diameter steel pipes welded roughly together.

6.6.2.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

6.6.3.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

6.6.4.3.3.2 Steels which have a Re Rm ratio of more than 0.85 are not allowed for the construction of welded shells.

They're just going to blow apart.

And what you do is you put it together in three layers, you weld it around the edge, and then you inflate it.

Lower rates of acceptance were seen for female trainees in industrial maintenance and soldering.

(b) Welder (1 post).

To hell with the screw!

To prevent leakage due to fire, only steel piping and welded joints shall be used between the jacket and the connection to the first closure of any outlet.

The recorded expenditure reflects the purchase of one vehicle lift, one hydraulic crane and welding equipment.

There's a gyroscope in it.

Helix

The Spiral

Spiral

Winkles?

What does he do weld 'em?

For example, clamp bands and sensor covers should be retained by parent bodies, and all fragments of explosive bolts should be captured.

Where external fittings are welded to the tank, the lining shall be continuous through the fitting and around the face of external flanges.

Metalwork basic metalwork, welding and soldering, ornamental wrought iron work, tool repair, machine maintenance and repair, tin work, etc.