6.6.2.5.4 As far as reasonably practicable, external fittings shall be grouped together.

6.6.3.5.7 External fittings shall be grouped together so far as reasonably practicable.

6.6.4.5.6 External fittings shall be grouped together so far as reasonably practicable.

External fittings shall be protected so as to preclude the release of the shell contents upon impact or overturning of the portable tank on its fittings.

External fittings shall be protected so as to preclude the release of the shell contents upon impact or overturning of the portable tank on its fittings.

Where external fittings are welded to the tank, the lining shall be continuous through the fitting and around the face of external flanges.

Bolted fittings

The external discharge fittings (pipe sockets, shut off devices), the stop valve and its seating shall be protected against the danger of being wrenched off by external forces (for example using shear sections).

The external discharge fittings (pipe sockets, shut off devices), the internal stop valve and its seating shall be protected against the danger of being wrenched off by external forces (for example using shear sections).

It's of black marble with silver fittings.

(iii) Replacement of sanitary fittings at Camp Khor facility

They deal exclusively with fittings for the matronly figure.

Then, suddenly, with fittings, hairdressing and makeup tests five of them were gone.

6.6.2.2.2 Portable tank shells, fittings, and pipework shall be constructed from materials which are

6.6.3.2.2 Portable tank shells, fittings and pipework shall be constructed of materials which are

(d) The thermal insulation shall not inhibit access to the fittings and discharge devices.

Paper and plastic products, packing materials, camp stores, hoses, fittings kitchen and catering supplies.

6.6.2.19.3 The initial inspection and test of a portable tank shall include a check of the design characteristics, an internal and external examination of the portable tank and its fittings with due regard to the substances to be transported, and a pressure test.

(c) Check of the threads if there is evidence of corrosion or if the fittings are removed

For insulated portable tanks, top fittings shall be surrounded by a spill collection reservoir with suitable drains.

(a) the shell including all the fittings are well protected from being hit by the forklift blades and

6.6.2.19.5 The intermediate 2.5 year periodic inspection and test shall at least include an internal and external examination of the portable tank and its fittings with due regard to the substances intended to be transported, a leakproofness test and a test of the satisfactory operation of all service equipment.

6.6.4.14.4 The 5 and 2.5 year periodic inspection and test shall include an external examination of the portable tank and its fittings with due regard to the refrigerated liquefied gases transported, a leakproofness test, a test of the satisfactory operation of all service equipment and a vacuum reading, when applicable.

The lining of every shell, shell fittings and piping shall be continuous, and shall extend around the face of any flange.

6.6.3.15.5 The intermediate 2.5 year periodic inspection and test shall at least include an internal and external examination of the portable tank and its fittings with due regard to the non refrigerated liquefied gases intended to be transported, a leakproofness test and a test of the satisfactory operation of all service equipment.

When the shell and its fittings have been pressure tested separately, they shall be subjected together after assembly to a leakproofness test.

6.6.3.15.3 The initial inspection and test of a portable tank shall include a check of the design characteristics, an internal and external examination of the portable tank and its fittings with due regard to the non refrigerated liquefied gases to be transported, and a pressure test referring to the test pressures according to 6.6.3.3.2.

6.6.4.14.3 The initial inspection and test of a portable tank shall include a check of the design characteristics, an internal and external examination of the portable tank shell and its fittings with due regard to the refrigerated liquefied gases to be transported, and a pressure test referring to the test pressures according to 6.6.4.3.2.

External

external

External

External auditors

External Auditor

External debt

External audit

External factors

External debt

External sector

External factors

External Programs

External Subtitles

External frontier

External Browsing

External Editor

External Application