External design pressure See 6.6.2.2.10. _ bar kPa gauge

There's your tailpipe heat, your fuel pressure gauge.

Test pressure means the maximum gauge pressure at the top of the shell during the pressure test

In no case shall the test pressure be less than 300 kPa (3 bar) gauge pressure.

Test pressure _ bar kPa gauge The unit used shall be marked.

Test pressure _bar kPa gauge The unit used shall be marked.

Test pressure means the maximum gauge pressure at the top of the shell during the hydraulic pressure test equal to not less than 1.5 times the design pressure.

6.6.4.2.9 The jacket of a vacuum insulated double wall tank shall have either an external design pressure not less than 100 kPa (1 bar) gauge pressure calculated in accordance with a recognized technical code or a calculated critical collapsing pressure of not less than 200 kPa (2 bar) gauge pressure.

(a) the maximum effective gauge pressure allowed in the shell during filling or discharge or

(b) the maximum effective gauge pressure to which the shell is designed, which shall be

6.6.3.2.8 Shells shall be designed to withstand an external pressure of at least 0.4 bar gauge above the internal pressure without permanent deformation.

This entry applies to fuel cell cartridge design types shown without their packaging to pass an internal pressure test at a pressure of 100 kPa (gauge).

They shall be subjected to an initial test and periodic tests every 10 years at a pressure of not less than 1MPa (10 bar) (gauge pressure).

Maximum allowable working pressure (MAWP) means the maximum effective gauge pressure permissible at the top of the shell of a loaded portable tank in its operating position including the highest effective pressure during filling and discharge

They shall be made of steel and subjected to an initial test and periodic tests every 10 years at a pressure of not less than 0.6MPa (6 bar, gauge pressure).

(b) the maximum effective gauge pressure to which the shell is designed which shall be not less than the sum of

Well, yes, I believe. I believe in an instrument panel, a pressure gauge, a compass, things I can see and touch.

They shall be made of steel and shall be subjected to an initial test and periodic tests every 10 years at a pressure of not less than 1MPa (10 bar, gauge pressure).

(i) the maximum effective gauge pressure to which the shell is designed as defined in (b) of the MAWP definition (see above) and

When the shell is to be subjected to a significant vacuum before filling or during discharge it shall be designed to withstand an external pressure of at least 0.9 bar gauge above the internal pressure and shall be proven at that pressure.

During carriage, the liquid shall be under a layer of inert gas with a gauge pressure of not less than 20 kPa (0.2 bar).

MAWP _ bar kPa gauge

When a frangible disc is inserted in series with the required pressure relief device, the space between the frangible disc and the pressure relief device shall be provided with a pressure gauge or suitable tell tale indicator for the detection of disc rupture, pin holing, or leakage which could cause a malfunction of the pressure relief system.

The fuel gauge is broken.

Dial gauge with magnet block

Distance gauge failing. Vision failing.

The space between the frangible disc and the device shall be provided with a pressure gauge or a suitable tell tale indicator. This arrangement permits the detection of disc rupture, pinholing or leakage which could cause a malfunction of the pressure relief device.

Wired with 14 gauge wire typically.

Month_ Year_ Test pressure_bar kPa gauge

Month_ Year_ Test Pressure_bar kPa gauge

Death! Who shall gauge my love?

Did you check the oil gauge?

For the first time, the China Europe Train will carry out the reloading operation of the broad gauge and standard gauge.

MAWP for heating cooling system _ bar kPa gauge

The exact number of deaths is difficult to gauge from the information available.

I used the galvanize and copper in a very light gauge, so it would buckle.

Pressure

Pressure

PRESSURE

Pressure

Pressure?

Design pressure means the pressure to be used in calculations required by a recognized pressure vessel code.

I urge the Council regularly to gauge the effect of resolution 1572 (2004) on the ground.

Trans shipment or bogey change at the interchange station due to gauge differences causes considerable delays.

Oil pressure, 59 and steady. Fuel pressure, 3.5 and steady.