Translation of "mold temperature" to Chinese language:


  Dictionary English-Chinese

Mold - translation : Temperature - translation :

  Examples (External sources, not reviewed)

A copper jelly mold.
一个铜制的果胶模子
And I kind of broke the mold with Sherman.
对于谢尔曼我打破了平常的模具
Scrotal temperature reflects intratesticular temperature and is lowered by shaving.
阴囊温度反映了睾丸温度 修剪体毛可以降低温度
This will typically involve the requirement to operate in temperature ranges from Hot Dry (Storage Temperature 71 C and Operational temperature without solar loading of 49 C), down to Cold (Storage Temperature 46 C and Operating temperature 46 C.
一般要求的工作温度范围从干热(储存温度为71 没有太阳能效应的工作温度为49 ) 到低温(储存温度为 46 工作温度为 46 )
Now it's evening, and my dinner first grew cold and then grew mold.
现在已是晚上 我的食物先变凉 继而发霉
But I also met aluminum mold makers, ammunition producers and all kinds of people.
但是 我还见到了铝制模具的工人 军火制造商 和其他各行各业的人
Its temperature drops.
下降了
At least 60 percent of the homes on the reservation are infested with black mold.
百分之六十以上的住房 发了霉
Color temperature adjustment tool
色温调整工具
It elevates the temperature.
提高温度
In accordance with this standard, people in Kaizhou which has the highest number of high temperature can receive 330 yuan. And people in Chengkou with the least days of high temperature can receive 80 yuan. And the maximum temperature of Youyang did not meet the high temperature standards, so there is no high temperature allowance.
按照这一标准 上个月高温天气天数最多的开州能领到330元 天数最少的城口则是80元 而酉阳最高温由于没达到高温标准外 所以没有高温津贴
In case of temperature above 40 , staff working in high temperature can receive up to 20 yuan per day of allowance (but for laborers who enjoy the high temperature job allowance).
40 以上高温工作人员每月最多可领20元 天的津贴 劳动者已经依法享受高温作业岗位津贴的除外
On that grid, I can then weave the high tide readings, water temperature, air temperature and Moon phases.
系呢上边 我可以加入涨潮嘅度数 水温 气温同埋月相
On that grid, I can then weave the high tide readings, water temperature, air temperature and Moon phases.
在此框架下我就能把高潮数据 水温 气温和月相编进去
You know, if I measured your temperature over 30 days, and I asked, What was the average temperature?
如果我给你量体温超过30天 然后我问平均体温是多少
The temperature has suddenly dropped.
气温突然下降了
A nurse took my temperature.
一個護士量了我的體溫
Just text us your temperature.
只要发体温度
My mother took my temperature.
我媽媽量了我的體溫
I have a high temperature.
我發燒了
Do you have a temperature?
你發燒了嗎
Tom doesn't have a temperature.
汤姆不发烧
2.8.2.3 Criteria for temperature control
2.8.2.3 温度控制标准
2.15.2.3 Criteria for temperature control
2.15.2.3 温度控制标准
The temperature would drop after the rain, and especially in the evening, the lowest temperature would be about 9 .
雨后气温降 尤其是夜间最低气温只有9 左右
And if you want, you can lay color in the mold, and get rid of the paint shop.
如果你愿意 你可以在模具里直接加颜色 就省的给车喷漆了
I poured it into the mold, which you can see there, which I've made from a tree trunk.
正如你们所见 我把它倒进了模子模子是用我树干做的
Finally, empty space has a temperature.
最后 真空区有它的温度
It probably gets about room temperature.
大约会达到室温
I seem to have a temperature.
我好像发烧
Keep it at a lower temperature.
保持在較低的溫度
Today's minimum temperature was 3 C.
今天的最低氣溫是三度
The storm sent the temperature down.
暴风雨袭来, 气温随之下降
Here, used as a proxy, temperature variability.
在这我们用温度变化作为一个参考物
Their ratio tells us the water temperature.
它们的比例能告诉我们水温
There's just silence and a cool temperature.
有的只是安静 和凉爽的温度
Six hours later, up goes the temperature.
六小时之后 又上升
That's the definition. There was no temperature.
这就是定义 没有温度
I took my temperature every six hours.
我每六小时量一次体温
The temperature today is seventy degrees Fahrenheit.
今天气温是华氏七十度
The temperature has stayed hot this week.
本周气温一直都很热
Then the second part will really just be examples of new technologies new media falling very much into that mold.
第二部分仅仅是新技术的例子 新媒体会塑成那种风格
And there's the temperature up there in 2009.
这是2009年的温度
The nurse took his temperature with a thermometer.
護士用溫度計量了量他的體溫
Psensor is a graphical temperature monitor for Linux
Psensor 是一个Linux 上的图形界面温度监视器

 

Related searches : Constant Mold - Mold Release - Iron Mold - Mold Insert - Slime Mold - Plastic Mold - Mold Filling - Mold Shrinkage - Mold Steel - Mold Cost - Mold Maker - Mold Plate - Shell Mold