Aluminium

Brushed Aluminium

International Primary Aluminium Institute

50B rigid aluminium large packagings

5. Australian Aluminium Council, Manuka, Australia

8. Australian Aluminium Council, Manuka, Australia

(b) Aluminium slag from solid rocket motors

The thickness of aluminium liner is 2.1 mm.

(e) Reducing anode effects in the aluminium smelter sector

50N metal (other than steel or aluminium) large packagings

IPAI International Primary Aluminium Institute . C.1 XXXIX(II)

Cylinders and individual cylinders in a bundle shall have a test pressure greater than or equal to 200 bar and a minimum wall thickness of 3.5 mm for aluminium alloy or 2 mm for steel.

3076 Aluminium alkyl 4.2 I 4.3 10 10mm N.A. N. 12.22.3

Typically, these materials comprise aluminium or woven composite material face sheets.

Aluminium and aluminium alloys used in the construction of shells shall have an elongation at fracture, in , of not less than 10,000 6Rm with an absolute minimum of 12 .

Aluminium and aluminium alloys used in the construction of shells shall have an elongation at fracture, in , of not less than 10 000 6Rm with an absolute minimum of 12 .

(b) Aluminium oxide slag and micro particles from orbital solid rocket motor firings

(d) Solid propellant perigee kick motors that release aluminium particles are to be avoided

MLI packages in front of aluminium targets were very effective due to multishock fragmentation.

10 Aluminium ( 7) 11 Tin ( 6) 12 Rice ( 6) 13 Hides and skins ( 5)

To get an iron spoon pewter and aluminium were too soft or too brittle

Construction of a US 1.2 billion aluminium project in Maputo is to begin in 1998.

The Qasion experiment to study the effect of weightlessness on the microstructure of aluminium nickel alloys.

(i) The use of solid propulsion in orbit is prohibited (they create clouds of aluminium particles)

Even if aluminium production increases, PFC emissions are expected to remain significantly lower than in 1990.

For Hollywood studios, the revenue sharing mechanism could help them reduce financial pressure in the early stage, while it turns out to be an incentive for the cast and crew.

(e) Developing new materials and advanced technologies for their production, including foam aluminium and new ceramic materials.

Steel is completely recyclable, and its production requires relatively small amounts of energy, compared, for instance, to aluminium.

This cooperation has given Raufoss Technology important new opportunities to supply advanced aluminium materials to the aerospace market.

The terminal ballistic efficiency of CFRP plates and sandwich panels is better than for those made of aluminium.

Hence, aluminium slag from orbital solid rocket motor firings must be regarded as a relevant space debris source.

Pressure

Pressure

PRESSURE

Pressure

Pressure?

Design pressure means the pressure to be used in calculations required by a recognized pressure vessel code.

Test pressure means the maximum gauge pressure at the top of the shell during the pressure test

King Sihanouk issued a statement on 17 June appealing to voters to cast their votes according to their conscience and to ignore threats, pressure or intimidation from any person or political party.

Oil pressure, 59 and steady. Fuel pressure, 3.5 and steady.

The impact resistance of carbon carbon materials is comparable with aluminium however, they have some brittle features (spall effects).

Cast

Cast

Cast

Cast