Color deformation

Sphere Cap Deformation

This is deformation!

Rm minimum tensile strength in N mm2.

Their strength they're almost the strongest material, tensile strength material known.

Their wing is covered with sensors, including sensors that sense deformation of the wing.

Here are stress strain curves generated by tensile testing five fibers made by the same spider.

Rm1 guaranteed minimum tensile strength (in N mm2) of the metal to be used (see 6.6.2.3.3)

Rm1 guaranteed minimum tensile strength (in N mm2) of the steel to be used (see 6.6.3.3.3)

Rm1 guaranteed minimum tensile strength (in N mm2) of the metal to be used (see 6.6.4.3.3)

Here are stress strain curves generated by tensile testing five fibers made by the same spider.

Any filled aerosol dispenser which shows evidence of leakage, deformation or excessive weight shall be rejected. .

The only real problem with the ascending aorta in people with Marfan syndrome is it lacks some tensile strength.

The implementation of a geodesic network in north Algeria to monitor tectonic plate deformation using GPS stations was discussed.

Reference steel means a steel with a tensile strength of 370 N mm2 and an elongation at fracture of 27

The Montserrat Volcano Observatory is using GPS technology to monitor deformation in the Soufrière Hills volcano, which began erupting in July 1995.

So, lots of work on skin deformation, you can see in some of these cases it works, in some cases it looks bad.

Where restraints such as banding or straps are used, these shall not be over tightened to cause damage or deformation of the package.

6.6.3.2.8 Shells shall be designed to withstand an external pressure of at least 0.4 bar gauge above the internal pressure without permanent deformation.

So this makes quantifying silk properties by methods such as tensile testing, which is basically, you know, tugging on one end of the fiber, very amenable.

So this makes quantifying silk properties by methods such as tensile testing, which is basically, you know, tugging on one end of the fiber, very amenable.

Remote sensing is not only used in preventive studies, but also in the monitoring of dynamic geological processes such as terrain deformation, neotectonic activities and flooding.

The inter plate motion and the crustal deformation between India and Antarctica was studied to help understand tectonic and geodynamical processes that take place in the Indian Ocean.

Mild steel means a steel with a guaranteed minimum tensile strength of 360 N mm2 to 440 N mm2 and a guaranteed minimum elongation at fracture conforming to 6.6.2.3.3.3

Mild steel means a steel with a guaranteed minimum tensile strength of 360 N mm2 to 440 N mm2 and a guaranteed minimum elongation at fracture conforming to 6.6.3.3.3.3

6.2.4.2.1.2 No leakage or permanent deformation of an aerosol dispenser may occur, except that a plastic aerosol dispenser may be deformed through softening provided that it does not leak.

6.6.2.2.10 A shell which is to be equipped with a vacuum relief device shall be designed to withstand, without permanent deformation, an external pressure of not less than 0.21 bar above the internal pressure.

A shell that is not to be fitted with a vacuum relief device shall be designed to withstand, without permanent deformation an external pressure of not less than 0.4 bar above the internal pressure.

6.6.2.3.3.4 For the purpose of determining actual values for materials, it shall be noted that for sheet metal, the axis of the tensile test specimen shall be at right angles (transversely) to the direction of rolling.

6.6.3.3.3.4 For the purpose of determining actual values for materials, it shall be noted that for sheet metal, the axis of the tensile test specimen shall be at right angles (transversely) to the direction of rolling.

6.6.4.3.3.4 For the purpose of determining actual values for materials, it shall be noted that for sheet metal, the axis of the tensile test specimen shall be at right angles (transversely) to the direction of rolling.

To satisfy the test, the container shall show no leakage, permanent deformation or damage that would render it unsuitable for use, and shall be in conformity with the dimensional requirements regarding handling, securing and transfer from one means of transport to another.

69. One major application of GPS was the integration of GPS data into a GIS to provide information for land, sea and air navigation, cadastral surveying, geodetic network densification, high precision aircraft positioning, photogrammetry without ground control, monitoring deformation and hydrographic surveys.

The quality assurance programme should include a record of proper pre sorting and verification that each batch or recycled plastics material has the proper melt flow rate, density, and tensile yield strength, consistent with that of the design type manufactured from such recycled material.

But the price of escape is a kind of deformation. Embittered, fanatical, vengeful those who rebel against the status quo enter the wider world seeking retaliation, not just against the regimes that deformed them, but against the West, which propped up the region s authoritarians in the interest of stability.

These moral rights include the rights of the holder of intellectual property to be recognized and designated as the creator of the work, creation or invention, the right of the holder to oppose any deformation or change of the work, creation or invention that would harm his honour or dignity.

The balance and realism of our State apos s foreign policy has enabled it to charter a new course towards the European and international communities, while at the same time strengthening our traditional ties with Russia and other partners within the former Soviet Union and rectifying the deformation of these ties.

In choosing the material, the design temperature range shall be taken into account with respect to risk of brittle fracture, to stress corrosion cracking and to resistance to impact. When fine grain steel is used, the guaranteed value of the yield strength shall be not more than 460 N mm2 and the guaranteed value of the upper limit of the tensile strength shall be not more than 725 N mm2 according to the material specification.

In choosing the material the design temperature range shall be taken into account with respect to risk of brittle fracture, to stress corrosion cracking and to resistance to impact. When fine grain steel is used, the guaranteed value of the yield strength shall be not more than 460 N mm2 and the guaranteed value of the upper limit of the tensile strength shall be not more than 725 N mm2 according to the material specification.

In choosing the material, the minimum design temperature shall be taken into account with respect to risk of brittle fracture, to hydrogen embrittlement, to stress corrosion cracking and to resistance to impact. When fine grain steel is used, the guaranteed value of the yield strength shall be not more than 460 N mm2 and the guaranteed value of the upper limit of the tensile strength shall be not more than 725 N mm2 in accordance with the material specifications.