Translation of "tensile strength values" to Chinese language:
Dictionary English-Chinese
Examples (External sources, not reviewed)
| Rm minimum tensile strength in N mm2. | Rm 以牛顿 毫米2表示的最小抗拉强度 |
| Their strength they're almost the strongest material, tensile strength material known. | 这些材料的优势是 它们几乎是最强壮的, 在已知的伸张力材料中最强的 |
| Rm1 guaranteed minimum tensile strength (in N mm2) of the metal to be used (see 6.6.2.3.3) | Rm1 所用金属的保证最小抗拉强度(牛顿 毫米2)(见6.6.2.3.3) |
| Rm1 guaranteed minimum tensile strength (in N mm2) of the steel to be used (see 6.6.3.3.3) | Rm1 所用钢的保证最小抗拉强度(牛顿 毫米2)(见6.6.3.3.3) |
| Rm1 guaranteed minimum tensile strength (in N mm2) of the metal to be used (see 6.6.4.3.3) | Rm 1 所用金属的保证最小抗拉强度(牛顿 毫米 2 )(见6.6.4.3.3) |
| The only real problem with the ascending aorta in people with Marfan syndrome is it lacks some tensile strength. | 马凡氏综合征的人的 升主动脉的真正问题 是它缺乏一些拉力 |
| Reference steel means a steel with a tensile strength of 370 N mm2 and an elongation at fracture of 27 | 参考钢是指抗拉强度为370牛顿 毫米2和断裂伸长率27 的钢 |
| 6.6.4.2.14 The values of yield strength or proof strength shall be the values according to national or international material standards. | 6.6.4.2.14 屈服强度或弹限强度的数值应是按国家或国际材料标准得出的数值 |
| Polish dedication to those values draws strength from our past experiences. | 波兰对那些价值观念的承诺是从我们过去的经验中汲取力量的 |
| 6.6.3.2.11 The values of yield strength or proof strength shall be the value according to national or international material standards. | 6.6.3.2.11 屈服强度或弹限强度的数值应是按国家或国际材料标准得出的数值 |
| Mild steel means a steel with a guaranteed minimum tensile strength of 360 N mm2 to 440 N mm2 and a guaranteed minimum elongation at fracture conforming to 6.6.2.3.3.3 | 低碳钢是指保证最小抗拉强度360牛顿 毫米2至440牛顿 毫米2及保证断裂伸长率符合6.6.2.3.3.3规定的钢 |
| Mild steel means a steel with a guaranteed minimum tensile strength of 360 N mm2 to 440 N mm2 and a guaranteed minimum elongation at fracture conforming to 6.6.3.3.3.3 | 低碳钢是指保证最小抗拉强度360牛顿 毫米2至440牛顿 毫米2及保证断裂伸长率符合6.6.3.3.3.3规定的钢 |
| When austenitic steels are used, the specified minimum values of yield strength and proof strength according to the material standards may be increased by up to 15 when greater values are attested in the material inspection certificate. | 使用奥氏体钢时 根据材料标准规定的屈服强度或弹限强度的最低数值可最多提高15 但需在材料检查证书中写明 |
| When austenitic steels are used, the specified minimum values of yield strength or proof strength according to the material standards may be increased by up to 15 when these greater values are attested in the material inspection certificate. | 使用奥氏体钢时 根据材料标准规定的屈服强度或弹限强度的最低数值可最多提高15 但需在材料检查证书中写明 |
| 6.6.2.3.3.4 For the purpose of determining actual values for materials, it shall be noted that for sheet metal, the axis of the tensile test specimen shall be at right angles (transversely) to the direction of rolling. | 6.6.2.3.3.4 为确定材料的实际数值 应注意 如使用钢板 伸长率测试用试样轴线应与轧制方向成直角(垂直) |
| 6.6.3.3.3.4 For the purpose of determining actual values for materials, it shall be noted that for sheet metal, the axis of the tensile test specimen shall be at right angles (transversely) to the direction of rolling. | 6.6.3.3.3.4 为确定材料的实际数值 应注意 如使用钢板 伸长率测试用试样轴线应与轧制方向成直角(垂直) |
| 6.6.4.3.3.4 For the purpose of determining actual values for materials, it shall be noted that for sheet metal, the axis of the tensile test specimen shall be at right angles (transversely) to the direction of rolling. | 6.6.4.3.3.4 为确定材料的实际数值 应注意 如使用金属板 伸长率测试用试样轴线应与轧制方向成直角(垂直) |
| When no material standard exists for the metal in question, or when non metallic materials are used the values of yield strength or proof strength shall be approved by the competent authority. | 如某种金属没有材料标准或在使用非金属材料时 所用屈服强度或弹限强度值应经主管当局核准 |
| Here are stress strain curves generated by tensile testing five fibers made by the same spider. | 这是同一只蜘蛛产岀的五种纤维 进行拉伸试验后 所产生的应变曲线 |
| Here are stress strain curves generated by tensile testing five fibers made by the same spider. | 呢個 張力延展 曲線 由延展性測試產生 嗰五條纖維喺由同樣隻蜘蛛製造 |
| The quality assurance programme should include a record of proper pre sorting and verification that each batch or recycled plastics material has the proper melt flow rate, density, and tensile yield strength, consistent with that of the design type manufactured from such recycled material. | 质量保证方案应包括记录正确的预先分类并核实每批回收塑料具有恰当的熔体流率 密度和拉伸强度 与用这类回收材料制造的设计型号相符 |
| Since that time, this process, which respects democratic values, has been continuing and gaining strength in freedom and respect for the institutions of the nation. | 自那以来,这一尊重民主价值的进程一直在自由和尊重国家体制的气氛中继续并逐步加强力量 |
| We should do more to foster a Chinese spirit, Chinese values, and Chinese strength in order to provide a source of cultural and moral guidance for our people. | 更好构筑中国精神 中国价值 中国力量 为人民提供精神指引 |
| Strength three. Strength three, over. | 风力三级 风力三级 完毕 |
| Strength four. Strength four, over. | 任务四 任务四 完毕 |
| We admired him for the strength of his ideas, his courage, his passion, and his capacity to transmit values and hope to all of us, especially to our younger generations. | 我们钦佩他思想的力量 他的勇气 他的热诚 以及他向我们所有人 特别是我们年轻的一代 传播价值和希望的能力 |
| Floating point values or range of values | 浮点数或数值范围 |
| In choosing the material, the design temperature range shall be taken into account with respect to risk of brittle fracture, to stress corrosion cracking and to resistance to impact. When fine grain steel is used, the guaranteed value of the yield strength shall be not more than 460 N mm2 and the guaranteed value of the upper limit of the tensile strength shall be not more than 725 N mm2 according to the material specification. | 选择材料时 应联系发生脆裂的危险 应力蚀裂及抗冲击性能考虑设计温度范围 使用细纹钢时 按照材料规格 保证屈服强度值应不超过460牛顿 毫米2,保证抗拉强度上限值应不超过725牛顿 毫米2 |
| In choosing the material the design temperature range shall be taken into account with respect to risk of brittle fracture, to stress corrosion cracking and to resistance to impact. When fine grain steel is used, the guaranteed value of the yield strength shall be not more than 460 N mm2 and the guaranteed value of the upper limit of the tensile strength shall be not more than 725 N mm2 according to the material specification. | 选择材料时 应联系发生脆裂的危险 应力蚀裂及抗冲击性能考虑设计温度范围 使用细纹钢时 按照材料规格 保证屈服强度值应不超过460牛顿 毫米2, 保证抗拉强度上限值应不超过725牛顿 毫米2 |
| Click to reset all values to initial values | 点击以重设所有初始值 |
| Strength | 力度 |
| Strength | 强度 |
| Strength | 强度 SSID is a friendly name that identifies a 802. 11 WLAN. |
| Strength | 强度 |
| Re yield strength in N mm2, or 0.2 proof strength or, for austenitic steels, 1 proof strength | Re 以牛顿 毫米2表示的屈服强度 或0.2 弹限强度 对于奥氏体钢为1 弹限强度 |
| Re yield strength in N mm2, or 0.2 proof strength or, for austenitic steels, 1 proof strength | Re 以牛顿 毫米2 表示的屈服强度 或0.2 弹限强度 对于奥氏体钢为 1 弹限强度 |
| Values | 标准 |
| Values | 值 |
| Values... | 作者name of the encoding target |
| Values | 数值name of the encoding target |
| Values... | 数值... name of the generated data |
| Values... | 数值... |
| Values | 值 |
| In choosing the material, the minimum design temperature shall be taken into account with respect to risk of brittle fracture, to hydrogen embrittlement, to stress corrosion cracking and to resistance to impact. When fine grain steel is used, the guaranteed value of the yield strength shall be not more than 460 N mm2 and the guaranteed value of the upper limit of the tensile strength shall be not more than 725 N mm2 in accordance with the material specifications. | 选择材料时 应联系发生脆裂的危险 氮致脆化效应 应力蚀裂及抗冲击性能考虑最低设计温度 使用细纹钢时 按照材料规格 保证屈服强度值应不超过460牛顿 毫米2 保证抗拉强度上限值应不超过725牛顿 毫米2 |
| Or put strength into the arrow like unto his strength? | 谁射出的箭够他的强 |
Related searches : Tensile Strength - Splitting Tensile Strength - Rated Tensile Strength - Wet Tensile Strength - Specific Tensile Strength - Concrete Tensile Strength - Higher Tensile Strength - Loop Tensile Strength - Tensile Bond Strength - High Tensile Strength - Yield Tensile Strength - Tensile Strength Yield - Tensile Strength Test - Bending Tensile Strength
