Translation of "thickness of skin" to Chinese language:
Dictionary English-Chinese
Examples (External sources, not reviewed)
| Thickness | 厚度 |
| Thickness | 线宽 |
| Line thickness | 线条粗细 |
| Border thickness | 线条粗细 |
| 6.6.2.4.1 The minimum shell thickness shall be the greater thickness based on | 6.6.2.4.1 最小罐壳厚度应取以下三项中数值最大者 |
| 6.6.3.4.1 The minimum shell thickness shall be the greater thickness based on | 6.6.3.4.1 最小罐壳厚度应取以下两项中数值较大者 |
| 6.6.4.4.1 The minimum shell thickness shall be the greater thickness based on | 6.6.4.4.1 最小罐壳厚度应取以下两项中数值较大者 |
| 6.6.4.4.4 For vacuum insulated tanks, the aggregate thickness of the jacket and the shell shall correspond to the minimum thickness prescribed in 6.6.4.4.2, the thickness of the shell itself being not less than the minimum thickness prescribed in 6.6.4.4.3. | 6.6.4.4.4 真空隔热罐体外皮和罐壳合计厚度应与6.6.4.4.2规定的最小厚度对应 罐壳厚度本身不小于6.6.4.4.3规定的最小厚度 |
| Font border thickness | 线条粗细 |
| L thickness of insulation layer m | L 隔热层厚度 米 |
| L thickness of insulation layer m | L 隔热层厚度 m |
| 6.6.2.4 Minimum shell thickness | 6.6.2.4 最小罐壳厚度 |
| 6.6.3.4 Minimum shell thickness | 6.6.3.4 最小罐壳厚度 |
| 6.6.4.4 Minimum shell thickness | 6.6.4.4 最小罐壳厚度 |
| thickness (mm reference steel) | 最小罐壳厚度 (单位 mm 参考钢) |
| The thickness of aluminium liner is 2.1 mm. | 铝护面层厚度2.1毫米 |
| L thickness of the insulation layer 0.075 m | 0.075米 U 热传导系数 |
| Equivalent thickness in reference steel _ mm | 参考钢等效厚度 毫米 |
| (g) An increase in wall thickness provided the thickness stays within the range permitted by the welding procedures specifications | 41.1 概要 |
| This thickness shall be exclusive of any corrosion allowance. | 厚度不计腐蚀允差 |
| 6.6.2.4.6 The equivalent thickness of a metal other than the thickness prescribed for the reference steel in 6.6.2.4.3 shall be determined using the following equation | 6.6.2.4.6 不同于6.6.2.4.3所述参考钢厚度的某种金属的等效厚度应按下式计算 |
| 6.6.3.4.4 The equivalent thickness of a steel other than the thickness prescribed for the reference steel in 6.6.3.4.2 shall be determined using the following formula | 6.6.3.4.4 不同于6.6.3.4.2所述参考钢厚度的某种钢的等效厚度应按下式计算 |
| Two nanometers is 20 atoms in thickness. | 两纳米就是20个原子那么厚 |
| Minimum shell thickness (in mm reference steel) | (单位mm 参考钢) |
| (i) a greater thickness of the same insulating material or | 试验必须由主管当局为此目的批准的设施进行 |
| No thickness of enamel could conceal value from his eyes. | 不论是多么厚的瓷釉掩盖 都逃不过他的精明眼光 |
| Never has the thickness of a straw come between us. | 从来是亲密无间 |
| 6.6.4.4.6 The equivalent thickness of a metal other than the thickness prescribed for the reference steel in 6.6.4.4.2 and 6.6.4.4.3 shall be determined using the following equation | 6.6.4.4.6 不同于6.6.4.4.2和6.6.4.4.3所述参考钢厚度的某种金属的等效厚度应按下式计算 |
| Watch the skin color watch the skin texture. | 注意看它皮肤的颜色 以及皮肤的纹理 |
| The thickness of the Arctic decreased more than 40 percent since 1960. | 自从1960年起 北极的 冰层厚度已减少 逾百分之40 |
| e1 required equivalent thickness (in mm) of the metal to be used | e1 所用金属需要的等效厚度(毫米) |
| e1 required equivalent thickness (in mm) of the steel to be used | e1 所用钢需要的等效厚度(毫米) |
| Skin | 外观 |
| Skin | 外观 |
| Typically steel is rolled between sets of rollers to produce the final thickness. | 一般而言 是通过一对对轧滚轧制出最后的厚度 |
| (ii) the same thickness of a different insulating material having better insulation properties | 41.2 允许的设计变化形式 |
| They can go into your skin and create skin infections. | 它们可以进入皮肤并造成皮肤感染 |
| Minimum shell thickness (mm reference steel) Bottom opening requir ements | 最小罐壳厚度(单位 mm 参考钢) |
| TP21 The wall thickness shall be not less than 8mm. | TP21 壁厚不得少于8毫米 |
| You can see that the skin pore structure changes enormously from stretched skin pores to the regular skin texture. | 你可以看到皮肤毛孔结构也有着巨大的变化 从被拉伸的皮肤毛孔 到普通的皮肤质地 |
| interface skin | Web 界面皮肤 |
| Draw skin | 绘制网状晶格 |
| skin name | 外观名称 |
| Skin Definition | 皮肤定义 |
| Skin name | 皮肤名称 |
Related searches : Skin Thickness - Of Skin - Thickness Of Hair - Thickness Of Coating - Thickness Of Material - Range Of Thickness - Thickness Of Wall - Thickness Of Paint - Thickness Of Lines - Thickness Of Steel - Thickness Of Bottom
