No water, no corrosion.

TP15 This substance may be carried as an aqueous solution (see 3.1.3).

It could be anti corrosion.

This thickness shall be exclusive of any corrosion allowance.

Corrosion of the respiratory tract is defined by destruction of the respiratory tract tissue after a single, limited period of exposure analogous to skin corrosion this includes destruction of the mucosa.

They are used in special applications, particularly those requiring high strength or corrosion resistance.

(c) lined with corrosion resistant material directly bonded to the shell or attached by equivalent means.

It has been simulated and tested to endure in the body corrosion free for over 80 years.

(c) Check of the threads if there is evidence of corrosion or if the fittings are removed

6.6.2.17.3 In the design of supports and frameworks the effects of environmental corrosion shall be taken into account.

6.6.3.13.3 In the design of supports and frameworks the effects of environmental corrosion shall be taken into account.

6.6.4.12.3 In the design of supports and frameworks the effects of environmental corrosion shall be taken into account.

It's not that they usually sue, it's not that they would win, but it's an indication of the corrosion of authority.

(e) all emergency devices and valves are free from corrosion, distortion and any damage or defect that could prevent their normal operation.

The 1997 amendments are aimed at ensuring that surveys of bulk carriers place particular emphasis on the areas susceptible to corrosion and damage.

For instance, there may be radiation induced decomposition in the high explosive, heat induced degradation of some components or corrosion at interfaces between different materials.

91. Corruption threatened good governance not only because it spread the social corrosion of crime, but also, because it exacted devastating economic, environmental and political consequences.

6.6.2.20.1 Every portable tank shall be fitted with a corrosion resistant metal plate permanently attached to the portable tank in a conspicuous place readily accessible for inspection.

6.6.3.16.1 Every portable tank shall be fitted with a corrosion resistant metal plate permanently attached to the portable tank in a conspicuous place readily accessible for inspection.

6.6.4.15.1 Every portable tank shall be fitted with a corrosion resistant metal plate permanently attached to the portable tank in a conspicuous place readily accessible for inspection.

(a) the shell is inspected for pitting, corrosion, or abrasions, dents, distortions, defects in welds or any other conditions, including leakage, that might render the shell unsafe for transport

(a) the shell is inspected for pitting, corrosion, or abrasions, dents, distortions, defects in welds or any other conditions, including leakage, that might render the portable tank unsafe for transport

67. Advanced structural ceramics (ASCs) are used in applications where high mechanical strength at high temperature, wear resistance, low density, corrosion resistance, hardness, stiffness and light weight are critical performance parameters.

These theories are needed to predict and achieve in solidified materials the desired microstructures that control many of their physical and chemical properties such as their mechanical strength and resistance to corrosion.

Your gold and your silver are corroded, and their corrosion will be for a testimony against you, and will eat your flesh like fire. You have laid up your treasure in the last days.

Your gold and your silver are corroded, and their corrosion will be for a testimony against you, and will eat your flesh like fire. You have laid up your treasure in the last days.

6.6.4.14.8 The internal examination during the initial inspection and test shall ensure that the shell is inspected for pitting, corrosion, or abrasions, dents, distortions, defects in welds or any other conditions, that might render the portable tank unsafe for transport.

In connection with levels of destruction and irreversible transformation, section III B of the general technical guidelines provides a provisional definition which refers to the persistent organic pollutant content of solid residues and the maximum acceptable atmospheric emissions of PCDDs and PCDFs from disposal operations, as well as examples of national legislation pertinent to atmospheric emissions and aqueous releases.

The capsule is hermetically sealed. The power capsules are designed and pass tests on resistance to aggressive action in accident circumstances, including high temperatures during movement in the atmosphere the action of chemicals that appear after destruction of the fuel system or in other emergency situations explosions impact on the solid surface of the Earth penetration into the soil, or immersion in fresh or salt water (no corrosion).

In choosing the material, the design temperature range shall be taken into account with respect to risk of brittle fracture, to stress corrosion cracking and to resistance to impact. When fine grain steel is used, the guaranteed value of the yield strength shall be not more than 460 N mm2 and the guaranteed value of the upper limit of the tensile strength shall be not more than 725 N mm2 according to the material specification.

In choosing the material the design temperature range shall be taken into account with respect to risk of brittle fracture, to stress corrosion cracking and to resistance to impact. When fine grain steel is used, the guaranteed value of the yield strength shall be not more than 460 N mm2 and the guaranteed value of the upper limit of the tensile strength shall be not more than 725 N mm2 according to the material specification.

In choosing the material, the minimum design temperature shall be taken into account with respect to risk of brittle fracture, to hydrogen embrittlement, to stress corrosion cracking and to resistance to impact. When fine grain steel is used, the guaranteed value of the yield strength shall be not more than 460 N mm2 and the guaranteed value of the upper limit of the tensile strength shall be not more than 725 N mm2 in accordance with the material specifications.