Design pressure means the pressure to be used in calculations required by a recognized pressure vessel code.

External design pressure See 6.6.2.2.10. _ bar kPa gauge

(h) A decrease of the maximum allowable working pressure, or maximum working pressure, not affecting thickness

Test pressure means the maximum gauge pressure at the top of the shell during the hydraulic pressure test equal to not less than 1.5 times the design pressure.

In Table 1, in the heading of column 13, replace Working pressure, bar with Maximum working pressure, bar

6.6.3.3.2 Shells shall be designed and constructed to withstand a test pressure not less than 1.3 times the design pressure.

6.6.2.3.2 Shells shall be designed and constructed to withstand a hydraulic test pressure not less than 1.5 times the design pressure.

(b) request a subsequent design type approval where such modifications constitute a new design according to the relevant pressure receptacle standard.

We've also been working in design.

The design pressure shall be not less than the highest of the following pressures

You know, one is just working without pressure.

This shall be at least two thirds of the design pressure of the aerosol dispenser.

(b) to provide data for the design of the pressure and emergency relief devices taking into account the design characteristics of the portable tank.

This entry applies to fuel cell cartridge design types shown without their packaging to pass an internal pressure test at a pressure of 100 kPa (gauge).

6.6.2.11.1 Except as specified in 6.6.2.8.3, frangible discs shall be set to rupture at a nominal pressure equal to the test pressure throughout the design temperature range.

(a) inform the issuing competent authority of modifications to the approved design type, where such modifications do not constitute a new design, as specified in the pressure receptacle standard or

6.6.4.2.9 The jacket of a vacuum insulated double wall tank shall have either an external design pressure not less than 100 kPa (1 bar) gauge pressure calculated in accordance with a recognized technical code or a calculated critical collapsing pressure of not less than 200 kPa (2 bar) gauge pressure.

the absolute vapour pressure (in bar) of the non refrigerated liquefied gas at the design reference temperature minus 1 bar and

UN No. Non refrigerated liquefied gases Max. allowable working pressure (bar) Small Bare Sunshield Insulated

Maximum allowable working pressure (MAWP) means the maximum effective gauge pressure permissible at the top of the shell of a loaded portable tank in its operating position including the highest effective pressure during filling and discharge

Design reference temperature means the temperature at which the vapour pressure of the contents is determined for the purpose of calculating the MAWP.

4.1.3.6.2 Every design type of pressure receptacle shall be approved by the competent authority of the country of manufacture or as indicated in Chapter 6.2.

20. The Special Representative is working to mobilize public opinion and political pressure against this terrible trend.

The vacuum relief device shall be set to relieve at a vacuum setting not greater than minus ( ) 0.21 bar unless the shell is designed for a higher external over pressure, in which case the vacuum relief pressure of the device to be fitted shall be not greater than the tank design vacuum pressure.

Spanish associations working in solidarity with the Saharan cause had had some success, resisting pressure exerted on them.

Maximum allowable working pressure (MAWP) means a pressure that shall be not less than the highest of the following pressures measured at the top of the shell while in operating position

7. Requests the Working Group to design an overall information management strategy for the United Nations system

arts,business,design,industrial design,product design

Now, Brunel was working 100 years before the emergence of the design profession, but I think he was using design thinking to solve problems and to create world changing innovations.

6.6.4.2 General design and construction requirements 6.6.4.2.1 Shells shall be designed and constructed in accordance with the requirements of a pressure vessel code recognized by the competent authority.

design,industrial design,technology

Design I love its design.

design,health care,product design

demo,design,interface design,technology

However, protection against particles 1 10 cm in size can be achieved through special features in the design of space systems (redundant subsystems, frangible structures, pressure vessel isolation capabilities etc.).

And today, architects and biologists are working together to explore smart building design that will create healthy buildings for us.

Since 1993, Canada has been working on design and implementation of a national Internet based educational network called Canada s SchoolNet.

DNA,arts,biology,creativity,design,industrial design,invention,nature,product design,transportation

culture,design,humor,product design,technology

business,design,economics,industrial design,technology

communication,culture,design,interface design,telecom

Pressure

Pressure

PRESSURE

Pressure