Bolted fittings

It's of black marble with silver fittings.

(iii) Replacement of sanitary fittings at Camp Khor facility

They deal exclusively with fittings for the matronly figure.

External fittings shall be protected so as to preclude the release of the shell contents upon impact or overturning of the portable tank on its fittings.

External fittings shall be protected so as to preclude the release of the shell contents upon impact or overturning of the portable tank on its fittings.

Then, suddenly, with fittings, hairdressing and makeup tests five of them were gone.

Paper and plastic products, packing materials, camp stores, hoses, fittings kitchen and catering supplies.

6.6.2.2.2 Portable tank shells, fittings, and pipework shall be constructed from materials which are

6.6.3.2.2 Portable tank shells, fittings and pipework shall be constructed of materials which are

(d) The thermal insulation shall not inhibit access to the fittings and discharge devices.

6.6.2.5.4 As far as reasonably practicable, external fittings shall be grouped together.

6.6.3.5.7 External fittings shall be grouped together so far as reasonably practicable.

6.6.4.5.6 External fittings shall be grouped together so far as reasonably practicable.

(a) the shell including all the fittings are well protected from being hit by the forklift blades and

The lining of every shell, shell fittings and piping shall be continuous, and shall extend around the face of any flange.

(c) Check of the threads if there is evidence of corrosion or if the fittings are removed

For insulated portable tanks, top fittings shall be surrounded by a spill collection reservoir with suitable drains.

And you can create parts with moving components, hinges, parts within parts.

When the shell and its fittings have been pressure tested separately, they shall be subjected together after assembly to a leakproofness test.

Where external fittings are welded to the tank, the lining shall be continuous through the fitting and around the face of external flanges.

Provision is made for the replacement of various pieces of installed equipment and kitchen fittings as a result of breakage, fair wear and tear and redundancy.

Parts and accessories

Any clearance between the corner fittings of the container under test and the securing devices at the impacting end of the test platform shall be minimised.

And that's two parts.

Spare parts and supplies.

Spare parts and supplies

Spare parts and accessories

Spare parts and supplies.

KParts are easy to use. Try inserting other parts or even parts in parts.

(b) equipped with four devices, in good condition, for securing the container under test in accordance with ISO 1161 1984 (Series 1 Freight containers Corner fittings Specification) and

and guard their private parts

and guard their private parts

and guard their private parts

and guard their private parts

Spare parts, repair and maintenance

(b) Spare parts and supplies

(b) Spare parts and supplies.

Spare parts, repairs and maintenance.

Spare parts, repairs and maintenance.

Spare parts, repairs and maintenance

48. Spare parts and supplies.

35. Spare parts and supplies.

48. Spare parts and supplies.

51. Spare parts and supplies.